• Tanks: Available in three high performance models
• Applicators: Trigger-pull or vertical manual applicators. Electric or pneumatic automatic applicators.
• Hoses: Therm-O-Flow Tanks support 1, 2 or 4 hoses and applicators
• Accessories: A full line of accessories including floor stands

1 Gallon Pail Unloader

Finally, an affordable compact Pail Unloader with many standard features not found or at considerable extra cost with other units. A brushless AC motor and gear pump with pressure regulation provide a reliable consistent dispense rate. A Static seal keeps all air out of the material without the need for expensive and labor intensive nitrogen systems used with PUR adhesives. Safety features abound as all moving parts are enclosed and are disabled when the unit’s door panels are opened. Simple intuitive controls, with visual diagnostics, make the operation safe and trouble-free. Air trapped in the pail is released via an automated purge valve keeping the operator away from dangerous material.

• Application Temperature - Up to 410 F (210 C)
• Tank Temperature - Up to 395 F (202 C)
• Temperature Accuracy - +/- 2%
• Melt Rate - 12 lbs/hr *
• Max Pump Rate - 28 lbs/hr
• Distribution Manifold - 1 Hose
• Adhesive Forms - Accepts all types
• Viscosity Range - to 20,000 centipoises
• Warm-Up Time - 30 Minutes *
• Tank Capacity - 12 lbs
• Empty Weight (Melt Unit) - 41 lbs
• Electrical Requirements - 100 to130vac, 200 to 240vac, Single Phase, 50-60 Hz.
• Length - 15.5 in
• Width - 10.5 in.
• Height - 14.5 in. (36.83 cm) / 19.5 in. ( 49.53 cm) With open lid
• * May vary depending on adhesive formula, ambient temperature and line voltage.

• Application Temperature - Up to 425 F (218 C)
• Tank Temperature - Up to 395 F (202 C)
• Temperature Accuracy - +/- 2%
• Melt Rate - 75 lbs/hr (34 Kg/hr) *
• Max Pump Rate - 100 lbs/hr (45 Kg/hr)
• Distribution Manifold - 1 to 4 Hoses
• Adhesive Forms - Accepts all types
• Viscosity Range - to 30,000 centipoises
• Warm-Up Time - 30 Minutes *
• Tank Capacity - 34 lbs (15.4 Kg)
• Empty Weight (Melt Unit) - 86 lbs (39 Kg)
• Electrical Requirements - 200 to 240VAC, Single Phase, 50-60 Hz.
• Circuit Breaker - 30 Amps
• Length - 22.0 in. (55.88 cm)
• Width - 14.25 in. (36.19 cm)
• Height - 19.0 in. (48.26 cm) / 27.5 in. (69.85 cm) With open lid
• * May vary depending on adhesive formula, ambient temperature and line voltage.

5 Gallon / 20 Liter Pail Unloader

Finally an affordable fully functional Pail Unloader with many standard features that are not available or require additional equipment with other units. A Variable speed AC brushless motor and gear pump with pressure regulation provides a consistent repeatable dispense rate. A Static seal keeps moisture and air out of the material without the need for expensive nitrogen systems and deflates for easy pail removal. Intuitive controls make the operation easy and safe. Trapped air is kept to a minimum and an automated purge valve keeps hands out of the pail.

• Application Temperature - Up to 425 F (218 C)
• Tank Temperature - Up to 395 F (202 C)
• Temperature Accuracy - +/- 2%
• Melt Rate - 28 lbs/hr (12.7 Kg/hr) *
• Max Pump Rate - 70 lbs/hr (31.7 Kg/hr)
• Distribution Manifold - 1 to 2 Hoses
• Adhesive Forms - Accepts all types
• Viscosity Range - to 30,000 centipoises
• Warm-Up Time - 30 Minutes *
• Tank Capacity - 14 lbs (6.3 Kg)
• Empty Weight (Melt Unit) - 51 lbs (23.1 Kg)
• Electrical Requirements - 100 to130vac, 200 to 240vac, Single Phase, 50-60 Hz.
• Circuit Breaker - 20 Amps
• Length - 20.13 in (51.13 cm)
• Width - 12.12 in. (30.78 cm)
• Height - 15.0 in. (38.1 cm) / 23.0 in. (58.42 cm) With open lid
• * May vary depending on adhesive formula, ambient temperature and line voltage.

• Teflon coated tank
• 4-6 hoses/channel
• 24/7 clock
• Available in 4L, 8L and 16L tank capacities