| Adhesive Tech™ HD-200 High Volume Glue Gun |
 |
The HD200 Glue Gun is one of the newest products designed and engineered by AdhesiveTech TM , which had been created to meet customer requests and needs. This high volume gun offers twice the output of another gun - especially in its price range. It dispenses approximately 3.9 lbs of glue per hour, making it an efficient tool - a workhorse, ready for maximum output on your assemnbly and packaging lines.
The HD200 has an operating temperature of 400 F, with its 8 PTC (positive Temperature Coefficient self-regulating solid state heaters) that insures outstanding temperature control that maintains a consistent heat. The melt chamber's design provides continuous adhesive flow. |
| Adhesive Tech™ EM-450 Glue Gun |
 |
The EM-450 Glue Gun fits right in with our line of glue guns suitable for industrial use. We like its many features such as the soft grip, ergonomic handle, which makes it comfortable for extended periods of use. Another feature that our clients like is the short warm-up. In less than 3 minutes, it offers you its 450 watts of optimum power. The EM450 provides a consistent flow and excellent glue output as you work. In Addition, the optional preset temperature modules enable you to change gun temperature at any time to the right heat required for a given job. This gives you greater control and increased efficiency.
The EM450 glue gun offers users the ability to easily adjust the heat of the gun for the temperature setting appropriate to specific application needs. We have 8 different preset temperature modules available. Preset Temperature Modules available: 265 F (129 C), 300 F (149 C), 325 F (163 C), 340 F (171 C), 375 F (191 C), 390 F (199 C), 400 F (204 C). |
| Adhesive Tech™ MT500 Manual Feed |
 |
5/8 inch Round Adhesive
120 Volt construction
HT #0357 LT #0356
This version operates manually. The unique palm-feed actuator offers a well-balanced design for comfortable use with less hand fatigue. It is available in two pre-set temperature choices: high temp (HT) 400° F/ 500 watts; low temp (LT) 300° F/ 400 watts depending on the application requirements.
Output: 5 lb/hr
Output/unit feed: 2.5 grams / stroke
Nozzle: check valve with removable tip
Temperature Control: Preset electronic thermostat
Weight: 1.9 lb |
| Adhesive Tech™ Charger |
 |
1/2 inch Round Adhesive
120 Volt construction
HT #0117
The Charger weighs only 14 ounces but its durable construction allows all day, every day use. Its dual PTC heating system insures outstanding temperature control and its melt chamber's efficient design provides up to 3 lbs of adhesive per hour. Its rugged glass-filled nylon handle can stand up to the most demanding
industrial applications.
Watts: 80
Output: HT up to 3.0 lb/hr.
Temperature Control: HT PTC* type,
Operating temperature: HT 400°F,
Weight: 14 ounces
*PTC -- Positive Temperature Coefficient self-regulating, solid-state heater. |
| Adhesive Tech™ Leader |
 |
1/2 inch Round Adhesive
120 Volt construction
HT #0152 LT #0153
Our workhorse, the Leader, is a high volume handgun that delivers over 3.7 lbs. of adhesive per hour through a unique melt grid chamber. It can keep up with almost any high volume application and its high delivery rate reduced hand fatigue -- no heat loss slowdowns or increased feeding force.
Watts: 125
Output: HT up to 3.7 lb/hr. LT up to 3.5 lb./hr.
Temperature Control: Preset electronic
Operating temperature: HT 400°F, LT 300°F
Weight: 1.5 lb |
| Adhesive Tech™ Pro-90 |
 |
1/2 inch Round Adhesive
120 Volt construction
HT #0900
The Pro-90 is a perfect complement to our larger glue guns. It uses a state-of-the-art PTC* heating system for accurate temperature control and its simple, compact design is perfect for small applications where precise adhesive placement is required. It is ready to use in under 4 minutes. It offers great performance for a fraction of the price you would expect to pay for such a reliable handgun.
Watts: 40
Output: HT up to 2.2 lb/hr
Temperature Control: PTC* type
Operating temperature: HT 380°F
Weight: 10 ounces
*PTC -- Positive Temperature Coefficient self-regulating, solid-state heater. |
| Adhesive Tech™ PT500 Pneumatic Feed |
 |
5/8 inch Round Adhesive
120 Volt construction
HT #0357 LT #0356
The Adhesive Tech™ PT 500 pneumatic applicator provides a high delivery volume of adhesive (up to 7 lb/hr) without hand fatigue. It has an extended check valve nozzle for enhanced glue line visibility and control. It is light in weight and very well-balanced, which makes it ideal for high volume packaging and product assembly applications. It is available in two pre-set temperature choices: high temp (HT) 400°F/ 500 watts;
low temp (LT) 300°F/ 400 watts.
Output: up to 7 lb/hr
Output/unit feed: 5 grams / stroke
Nozzle: check valve with removable tip
Temperature control: Preset electronic thermostat
Air pressure required: 40-100 psi
Weight: 2.5 lb |
| Adhesive Tech™ CB800 Portable Butane |
 |
The Portable CB800 Butane Glue Gun is certain to be the handiest and most useful new addition for getting at your hard-to-get work areas.
The Construction and Building trades will find it handy for fixing electric cables into the back of a channeled-out wall prior to plastering, or for fixing low voltage telephone and burgler alarm wires in place. Use it to temporarily affix wood, metal or plastic brackets on a site prior to final screwing applications. Use it to stick insulation material in place, seal seams along foam pipe insulation, fix ceramic tiles prior to routing, fix plastic covers and molds to walls and ceilings; as well as fix electrical junction boxes in place. Its small size makes it easy to transport, just place in your tool kit and go! Ideal companion to the larger CB900 Portable Glue Gun.
The Automotive Industry will find it invaluable in fixing badges and trim on to cars, sticking sound-deadening material in place in trunks of cars, fixing the interior carpeting, holding electrical wiring in place, and for the repair and fill of cracked plastic molding on dashboards, etc. Installers of flooring , will discover the CB800 is ideal for fixing wood tack strips to cement floors for carpets or for the repair of carpets when damaged areas need to be replaced. |
| CB900 Portasol Cordless Bonder Manual Feed |
 |
Utilizing Portasol's latest patented technology, the CB900 Cordless Bonder incorporates an innovative temperature control system, reinvented ergonomics and cutting-edge ignition for a lightning-fast 5-minute warm-up. And, it's cordless!
Glue sticks: 1/2" (12mm) standard round glue stick
* Temperature: 400 degrees F (204 degrees C) warm-up time: 5 minutes
* A trigger squeeze dispenses approximately a 1/8" bead of glue 16" long (.05 oz 1.4g) Dispenses approximately 3.5 pounds (1.6kg) of glue per hour.
* Applicator size: 10" L x 11" H x 2.5" W (254mm x 280mm x 64mm)
* Lightweight: 1.65 pounds (741 g)
* Stroke Length: 1/2" (12mm)
* Fuel Capacity: 2oz. (56g) Refill: one charge lasts up to 2 hours.
* Warranty: 1-year Limited
* Self-storing, built-in stand
* Cordless |
| Adhesive Tech™ B-600S Pneumatic Hot Spray System |
 |
The Adhesive Tech™ B600-S Hot Spray System is an effective, safe, OSHA-compliant, non-toxic alternative to aerosol adhesives. Plus, the B600-S delivers significant savings over the typical hot spray or VOC method. Designed to be used with both high-temp and low-temp glues, the Adhesive Tech™ B600-S Hot Spray System represents state-of-the-art engineering that meets the needs of the industrial job site.
This precision tool features several unique controls.
* A unique adjustable spray nozzle that allows the operator to change the range of spray quickly and easily. Extrusion pattern can be adjusted from a tight pinpoint to a wide, overall spray pattern.
* The variable electronic temperature control, allowing the operator to select the optimum temperature for the selected glue. Range: 210-degrees F to 400-degrees F.
* Air pressure gauges are built right into the stand, allowing precision control and optimum glue application for production needs. |
| Adhesive Tech™ 500 System Accessories |
 |
| Adhesive Tech™ Glue Gun Accessories |
 |
