Finally, an affordable compact Pail Unloader with many standard features not found or at considerable extra cost with other units. A brushless AC motor and gear pump with pressure regulation provide a reliable consistent dispense rate. A Static seal keeps all air out of the material without the need for expensive and labor intensive nitrogen systems used with PUR adhesives. Safety features abound as all moving parts are enclosed and are disabled when the unit’s door panels are opened. Simple intuitive controls, with visual diagnostics, make the operation safe and trouble-free. Air trapped in the pail is released via an automated purge valve keeping the operator away from dangerous material.

Unit shown with Optional Hose Support Tube.

Specifications

• Power: 115/230 VAC 50/60 Hz15 Amp Max
• Air: 65 PSI (4.5 BAR) min
• Weight: 69 lbs (31.4Kg.)
• Height: 22.0 in. (55.8mm.)
• Width: 11.0 in. (30.5mm.)
• Depth: 15.5 in.(30.5mm.)
• Pump Type: Gear
• Motor: AC with gear reduction
• Pump Rate: 15lbs/hr (6.8Kg.)
• Adhesive: Accepts all types in 1 Gallon Pail
  including PR’s
• Melt Rate*: 15lbs/hr Smooth Platen 21lbs/hr
  Finned Platen
• Hoses: Standard -4 JIC to 24ft (7.3m.)
• Applicators: Manual or Automatic
• Type: Extrusion or Swirl
• Timers: Direct Panel Connection
• Air Control for Spray/Swirl: Direct Panel Connection

*dependant on material type

Patent Pending

Features

• 1 Hose/ Applicator Ready Standard
• Manual or Automatic Applicators
• Extrusion or Air Swirl*
• Enclosed for Safety
• No Moving Parts Outside of the Unit
• Gear Pump for Consistent Pressure
• Easy to Read Control Panel
• Over Temperature Safety Protection
• Small Footprint
• Safety Interlock Door Switch
• Direct Connections for Timers and
  Air Controls
• Static Seal for Difficult Materials
• LED Illuminated Interior